Cable Gland Size Chart for Armoured & Double Compression Glands

Choosing the right cable connector size is one of the most easily overlooked yet crucial steps in electrical installation. Whether you’re handling armored cables in heavy industry or wiring equipment in hazardous locations, selecting the right connector ensures mechanical tightness, environmental sealing, and long-term reliability.

Hoonsun Cable Gland manufactures a full range of brass, stainless steel, armored, double-clamp, and explosion-proof cable connectors designed for industrial applications. This article explains the principles of cable connector size selection, how to interpret cable connector size charts, and how to select the appropriate model for your project.

Why Cable Gland Sizing Matters?

A cable gland does more than secure a cable. It must:

• Maintain ingress protection
• Provide strain relief
• Bond or clamp armor when required
• Seal against moisture, dust, and corrosive elements
• Meet flame-retardant and explosion-proof standards when applicable

An undersized gland can damage cable insulation. An oversized gland can compromise sealing and IP ratings. Accurate sizing prevents both issues.

Key Factors in Cable Gland Selection

Before referencing any size chart, confirm the following:

1.  Cable Type

• Unarmored cable
• Steel wire armored (SWA) cable
• Steel tape armored cable
• Double armored cable

2. Outer Diameter (OD)

The cable’s outer diameter determines the clamping range. Always measure the actual cable—not just the nominal size.

3. Thread Type

Common thread standards include:

• Metric
• PG threads
• NPT threads
• G (BSPP) threads

HXCableGland products support Metric, PG, G, and NPT threads depending on the model.

4. Application Environment

• General industrial use (IP54)
• Outdoor or washdown (IP68)
• Hazardous areas (Ex d IIC Gb)
• Flame-retardant requirements (UL94-V0)

Armoured Cable Gland Size Chart Overview

Below is a simplified interpretation of common armored gland ranges based on HXCableGland product specifications.

Example: BWL Armoured Cable Gland (Brass, IP54)

Thread	Cable OD Min (mm)	Cable OD Max (mm)	Thread Length GL (mm)	Joint Length H (mm)	Spanner Size (mm)	Code
M20×1.5	14	21.1	10	17	24	HX-BWL-20L
M20×1.5	11.7	16.1	10	17	22/23	HX-BWL-20S
M25×1.5	20	27	10	23	34	HX-BWL-25L
M25×1.5	19	24	10	23	31	HX-BWL-25S
M32×1.5	26.2	33	10	23	40	HX-BWL-32L
M32×1.5	24	30.5	10	23	36	HX-BWL-32S
M40×1.5	32.5	41	10	25	45/48	HX-BWL-40L
M50×1.5	44.1	55.7	15	32	55/63	HX-BWL-50L
M63×1.5	56	68.2	15	38	78	HX-BWL-63L

BW Series Armoured Cable Gland (Nickel-Plated Brass -IP54)

Item	Thread	Cable OD Min (mm)	Cable OD Max (mm)	Thread Length (mm)	Joint Length (mm)	Spanner Size (mm)	Code
BW-0	M20×1.5	12.6	16.5	10	23	22	HX-BW0
BW-1	M20×1.5	15.9	19.0	10	26	27/25/24	HX-BW1
BW-2	M25×1.5	20.6	26.5	10	29	35	HX-BW2
BW-3	M32×1.5	26.5	33.0	10	32	40	HX-BW3
BW-4	M40×1.5	34.9	40.5	15	36	50	HX-BW4
BW-5	M50×1.5	44.5	51.0	15	45	64	HX-BW5
BW-6	M63×1.5	57.0	67.0	15	50	82	HX-BW6

Double Compression Armoured Cable Glands (IP68)

Double compression glands provide enhanced sealing and mechanical retention. They are ideal for:

• Outdoor installations
• Oil & gas facilities
• Marine applications
• High-vibration environments

Example: EX1 Armoured Explosion-Proof Gland

Thread	Outer Sheath OD (mm)	Inner Sheath OD (mm)	Armor Range (mm)	Thread Length GL (mm)	Joint Length H (mm)	Code
M20×1.5	10–14	6–10	0.9/1.25	15	30	HX-EX1.M20-14
M20×1.5	13–18	9–14	0.9/1.25	15	32	HX-EX1.M20-18
M25×1.5	17–24	13–20	1.25/1.6	15	35	HX-EX1.M25
M32×1.5	23–32	18–26	1.6/2.0	15	39	HX-EX1.M32
M40×1.5	31–38	25–32	1.6/2.0	15	43	HX-EX1.M40
M50×1.5	37–44	31–38	1.8/2.5	15	48	HX-EX1.M50
M63×1.5	45–55	36–47	1.8/2.5	15	53	HX-EX1.M63

EX3 Series Explosion-Proof Cable Clamp Sealing Joint

Metric Thread	Inch Thread	Cable OD Range (mm)	Thread Length (mm)	Joint Length (mm)	Code
M16×1.5	G3/8	7–15	15	53	HX-EX3.M16-15
M20×1.5	G1/2	7–15	15	53	HX-EX3.M20-15
M25×1.5	G3/4	11–20	15	53	HX-EX3.M25-20
M32×1.5	G1	14–25	17	60	HX-EX3.M32-25
M40×1.5	G1-1/4	19–33	17	70	HX-EX3.M40-33
M50×1.5	G1-1/2	24–41	17	78	HX-EX3.M50-41
M63×1.5	G2	30–50	17	82	HX-EX3.M63-50

CW Series Simple Armored Cable Gland (IP54)

Thread	Incoming Cable OD (mm)	Outgoing OD (mm)	Thread Length (mm)	Joint Length (mm)	Code
M20×1.5	14–20.9	16	10	35	HX-CW-20L
M25×1.5	20–27	21.5	10	55	HX-CW-25L
M32×1.5	26.2–33	27	10	55	HX-CW-32L
M40×1.5	32.5–41	35	11	50	HX-CW-40L
M50×1.5	44.1–53.1	45	15	57	HX-CW-50L
M63×1.5	50–59.4	59	15	68	HX-CW-63L

How to Read a Cable Gland Size Chart?

When reviewing a size chart, focus on these columns:

1. Thread Size

Determines compatibility with enclosure entry hole.

2. Cable Outer Diameter Range

The most important measurement. Your cable OD must fall within this range.

3. Thread Length (GL)

Indicates how much threaded portion enters the enclosure.

4. Joint Length (H)

Overall compression length.

5. Spanner Size

Required wrench size for installation.

Common Mistakes When Reading a Cable Gland Chart

Assuming nominal cable size equals outer diameter

• Ignoring armor thickness
• Confusing Metric and NPT threads
• Overlooking enclosure wall thickness
• Choosing IP54 when IP68 is required
• Not verifying hazardous area certification

Conclusion

A cable gland size chart should never be read as a simple dimension list. It is a technical selection tool that ensures:

• Proper mechanical retention
• Long-term environmental sealing
• Regulatory compliance
• Electrical continuity
• Installation safety

When specifying glands for industrial or hazardous applications, always evaluate the complete parameter set, not just thread size. For full technical documentation, explosion-proof certifications, and engineering support, visit: https://www.hxcablegland.com/.