Explosion-proof Cable Clamp Sealing Goint

Material:Brass/SS304/SS316L
Suface treatment:Nickel plating,Passivation
Sealing materials:silastic、Neoprene
Explosion-proot mark:Exd IIC Gb
Fireproof classification:UL94-V0
Protecyion grade:IP66-10bars
Ambinent temperature:Static from -60℃to100℃,short time 120℃
Dymamic from -20℃to80℃,short time 100℃

Inquiry Now >

VIDEO

video video

Dimension Drawing

Explosion-proof Cable Clamp Sealing Goint

Technical Parameter

Explosion-proof Cable Clamp Sealing Goint Product Introduction

Explosion-proof cable clamp sealing goint is used for the sealing joints of braided armored and steel tape armored cables. It provides waterproof and dustproof sealing on the cable inner sheath. The cable clamp sealing goint provides mechanical support and armor through the cable armored end. Continuity of the installation grounding.

Explosion-proof cable clamp sealing goint can also be installed with a detachable armor cone so that the cable clamp sealing goint can be installed indirectly and the cable can be disconnected from the device. Cable clamp sealing goint can also be installed with a round jacket ring for flood protection.

 

 Metric thread(M)   Inch screw threads(G)  Outer diameter cable(mm) L1 Thread length (mm) L  length(mm) L2 length(mm)   EX-mark   Protection level
Outlet A  incoming line B
M16×1.5 8 7—15 15 68 85 Exd IIC  Gb Ip66
M20×1.5 G1/2 8 7—15 15 68 85
M25×1.5 G3/4 13 11—20 15 72 87
M32×1.5 G1 16 14-25 17 77 92
M40×1.5 G1 1/4 21 19-33 17 77 95
M50×1.5 G1 1/2 25 24-41 17 95 100
M63×1.5 G2 32.5 30-50 17 99 110
M75×1.5 G2 1/2 44 38-64 17 113 127
M85×1.5 G3S 52 47-74 18 113 127
M90×1.5 G3 52 47-74 18 127 137
M100×1.5 G4S 64 57-90 18 127 137
M110×1.5 G4 72 62-103 18 127 137

According the customer’s requirements the extended GL screws are available

Contact Form

    +86-577-62628623