EMC Cable Gland T Type
Material:Nickel-plated brass
Claw:PA(Nylon),UL94-V2
Hermetic seal:NBR、Silicone rubber
O-Ring:NBR、Silicone rubber
Protection degree:IP68-10 bra
Temperature:Static state:-40℃ to 100℃
Dynamic state:-20℃ to 80℃
Material:Nickel-plated brass
Claw:PA(Nylon),UL94-V2
Hermetic seal:NBR、Silicone rubber
O-Ring:NBR、Silicone rubber
Protection degree:IP68-10 bra
Temperature:Static state:-40℃ to 100℃
Dynamic state:-20℃ to 80℃
Product material: The metal parts of EMC cable gland are made of nickel-plated brass or stainless steel, the clamping parts are made of U-approved nylon PA66, and the seals and O-rings are made of NB rubber.
Product features: EMC cable gland T type is specially designed to treat the metal cable fixing head as an end body. When the isolated wire cable enters the fixing head, the copper contact sheet attached in the fixing head can be used to contact the metal in the cable. Isolate the braided mesh contact, and then guide the interference electromagnetic wave to the ground wire, so that the electromagnetic wave interference source can be evacuated. The omni-directional size of this EMC cable gland T type fixing head can be fully applied to all fields that need to be protected against electromagnetic waves, and it provides a solid waterproof IP68 and fixed tensile effect.Plaease contact us, if you’re interested in our products.
Item | Range Φ mm |
Tread Length GL mm |
H Joint Length mm |
Spanner size mm |
Code | |||
M | PG | G | NPT | |||||
M12×1.5 | PG7 | G1/4 | NPT1/4 | 3-6.5 | 6.5 | 21 | 14 | HX-EMC- “Item”-T |
4-8 | 8 | 21 | 17/14 | |||||
M16×1.5 | PG9 | 3-6 | 8 | 25 | 18 | |||
4-8 | 8 | 25 | 18 | |||||
5-10 | 8 | 25 | 20/18 | |||||
M18×1.5 | PG11 | G3/8 | NPT3/8 | 5-10 | 8 | 25 | 20 | |
M20×1.5 | PG13.5 | G1/2 | NPT1/2 | 6-12 | 8 | 29 | 22 | |
10-14 | 8 | 29 | 24/22 | |||||
M22×1.5 | PG16 | 10-14 | 8 | 29 | 24 | |||
M25×1.5 | G3/4 | NPT3/4 | 10-14 | 9 | 30 | 24/27 | ||
PG21 | 12-16 | 9 | 30 | 27 | ||||
13-18 | 9 | 30 | 30/27 | |||||
M32×1.5 | 15-22 | 10 | 32 | 35 | ||||
PG29 | G1 | NPT1 | 18-25 | 10 | 32 | 40/35 | ||
M40×1.5 | 18-25 | 11 | 35 | 40/45 | ||||
22-30 | 11 | 35 | 45 | |||||
PG36 | G1-1/4 | NPT1-1/4 | 25-33 | 11 | 35 | 50/45 | ||
M50×1.5 | PG42 | G1-1/2 | NPT1-1/2 | 32-38 | 13 | 39 | 57/55 | |
M63×1.5 | PG48 | G2 | NPT2 | 37-44 | 14 | 40 | 64/68 | |
42-52 | 14 | 40 | 78/68 |